User Manual Q&AAnswer
Jan 21, 2025 - 05:49 AM
To install the MinebeaMitsumi Smart Lighting Node Hybrid NEMA, please follow the instructions provided in the installation manual. Here is a step-by-step guide:
1. Unpack the product and check for any damages before installation.
2. Ensure that the product is intended for outdoor installation and does not require a safety connection to electrical earth.
3. The installation, service, and repair of the product should be performed by trained and skilled personnel only.
4. Install the product in accordance with the instructions provided in the installation manual to avoid errors or damages.
5. The product is suitable for elevations up to 2000 m.
6. The product and its units should only be used for their intended purpose. Any other use is considered improper and dangerous.
7. Before connecting the product, make sure that the product voltage ratings correspond to the mains power supply voltage.
8. The product drivers are default set as per the configuration sheet provided. Install the product only in luminaires with compatible drivers.
9. When plugging the product into the luminaire socket, ensure that the North indicator on the cap aligns with the North indicator of the luminaire socket.
10. Install the product under good GPS coverage.
11. Before cleaning or servicing the product, disconnect it from the mains power.
12. Dispose of packaging or product in compliance with applicable waste disposal regulations.
13. Keep the installation manual for future reference.
Please note that these instructions are a summary. For detailed installation steps and additional information, refer to the full manual available at the provided internet address upon registration at the Paradox Engineering website.
Add New Comment