User Manual Q&AAnswer
Jan 21, 2025 - 05:38 AM
To connect the ArduCam B0393 Camera Module to your Raspberry Pi, follow these steps:
1. Locate the camera port near the USB C power connector on your Raspberry Pi.
2. Gently pull up on the plastic edge of the camera port.
3. Insert the camera ribbon into the camera MIPI port on the Raspberry Pi, ensuring that the silver connector is facing the port. Be careful not to bend the flex cable and make sure it is firmly inserted.
4. Push the plastic connector down while holding the flex cable until the connector is back in place.
For a visual representation, you can refer to the "CONNECT THE CAMERA" section in the ArduCam B0393 Camera Module User Guide.
Please note that the ArduCam B0393 Camera Module is compatible with the Raspberry Pi's camera port and requires the latest version of Raspberry Pi OS (January 28th, 2022, or later releases, Debian version: 11 (bullseye)).
For further information and troubleshooting, you can refer to the ArduCam B0393 Camera Module User Guide or contact Arducam support via email, forum, or Skype.
Add New Comment