How do I install the Paul Neuhaus 11154 Pendant Light? (Paul Neuhaus 11154 Pendant Light Instruction Manual)

Answer

manuals.plus

Jan 21, 2025 - 05:15 AM

Installation of the Paul Neuhaus 11154 Pendant Light is relatively straightforward. Here is a step-by-step guide based on the information provided in the instruction manual:

1. Before starting the installation, make sure the power supply to the installation point is turned off.

2. Gather the necessary tools for installation. The manual does not specify the required tools, but typically, a screwdriver, wire strippers, and a ladder or step stool may be needed.

3. Determine the desired location for the pendant light. Ensure that the ceiling is suitable for installation and can support the weight of the light fixture.

4. Remove the packaging and carefully unpack the pendant light. Inspect the product for any visible damage or missing parts. If any issues are found, contact the manufacturer's customer service for assistance.

5. Connect the electrical wires of the pendant light to the power supply. The light requires a single E27 bulb with a maximum power rating of 60W. Ensure that the power supply is compatible with 230V/50Hz.

6. Follow the wiring instructions provided in the manual to connect the wires correctly. It is recommended to consult a qualified electrician if you are unsure about the wiring process.

7. Once the wiring is complete, attach the pendant light to the ceiling using the included mounting hardware. The manual does not provide specific instructions for this step, so refer to the product's design and the hardware provided to determine the appropriate installation method.

8. Double-check all connections and ensure that the pendant light is securely attached to the ceiling.

9. Turn on the power supply and test the pendant light to ensure it is functioning correctly.

If you encounter any difficulties during the installation process or have specific questions about your particular situation, it is recommended to contact the manufacturer's customer service at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de for further assistance.