User Manual Q&AAnswer
Jan 21, 2025 - 05:14 AM
To install the National Cycle N20412 VStream Low Beaded Windscreen on your 2021 Harley-Davidson Pan America, please follow these steps:
1. Put your motorcycle securely on its centerstand before beginning the installation.
2. Use a T-25 Torx Wrench to remove the four screws securing the OEM windscreen to the motorcycle, and then remove the windscreen.
3. Use the same T-25 Torx Wrench to remove the four screws securing the OEM deflectors to the motorcycle, and then remove the deflectors.
4. Now you are ready to install the new polycarbonate Deflectors (C, B). You will need to include the stand-off Spacers (D, E).
5. Insert the supplied M5x16 Cap Screws (F) through the front of the new Deflectors (C, B). On the back, add the thin Black Nylon Spacers (D) behind the top two mount holes, and the thick Stainless Steel Spacers (E) behind the bottom two mount holes.
6. Use a 3mm Allen Wrench to tighten the left and right M5x16 Cap Screws securing the new Deflectors to the motorcycle. Be careful not to over-torque the Cap Screws.
7. Open the Alcohol Prep Wipe (H) and clean the area shown on the bike’s windshield mount brackets.
8. Peel the adhesive Rubber Bumpers (G) and place one on each side of the bike’s windshield mount brackets, just beneath the two vertical slits. Press and hold them for 15-20 seconds to ensure complete adhesion.
9. Place your new VStream Windscreen on the motorcycle. It will insert into the lower windscreen mount tray the same as the OEM windscreen.
10. Using the OEM screws, attach the VStream Windscreen to the motorcycle’s mount points, and tighten with a T-25 Torx Wrench.
11. Double-check all fasteners for tightness before operating your motorcycle.
Please note that it is important to read the complete instruction manual provided with the product for additional information on cleaning, maintenance, and warranty details.
Add New Comment