User Manual Q&AAnswer
Jan 21, 2025 - 05:06 AM
To set the pressure on the scheppach HC20Si Twin Compressor, follow these steps:
1. Locate the pressure regulator (11) on the compressor. This is the xxxx or dial that allows you to adjust the pressure.
2. Use the pressure gauge (12) to monitor the current pressure in the pressure vessel (2).
3. Turn the pressure regulator clockwise to increase the pressure or counterclockwise to decrease the pressure.
4. Adjust the pressure to the desired level as indicated on the pressure gauge.
5. Once you have set the desired pressure, the compressor will automatically maintain that pressure during operation.
Note: The pressure switch (14) on the compressor is factory-set and should not be adjusted by the user.
For more detailed instructions and safety information, please refer to the scheppach HC20Si Twin Compressor Instruction Manual.
Add New Comment