User Manual Q&AAnswer
Jan 21, 2025 - 04:50 AM
To assemble the PROAIM BP12C-BMP40R 12ft Carbon Fiber Boom Pole with 40cm R Blimp Windscreen, please follow these steps:
1. Start by detaching the big part of the blimp handle by loosening the ratchet xxxx .
2. Remove the spring and bolt from the other side of the blimp handle.
3. Position the small part of the blimp adapter on one side of the blimp handle.
4. Tighten the entire adapter set with the xxxx .
5. Mount the 3/8" boom pole adapter on the boom pole.
6. xxxx -in the adapter mounted on the blimp with the adapter on the boom pole.
7. If desired, you can extend the boom pole up to 12ft by loosening the rings.
Note: Alternatively, you can directly attach the boom pole with the blimp's handle.
For further assistance or if you have any other questions or concerns, please contact the manufacturer directly. They offer a one-year warranty for their products and promise to provide support and care until you are satisfied with the use of their product.
Add New Comment