User Manual Q&AAnswer
Jan 21, 2025 - 04:49 AM
To set the time on the GoGEN Baby Light Alarm Clock, press and hold the S button for 2 seconds until you hear a "tick" sound. The number indicating the year will start flashing. Use the UP and DOWN buttons to adjust the year, then press the S button to move to the month, day, hour, and minute settings. Adjust each value using the UP and DOWN buttons, and press the S button to exit the setting mode.
To set the alarm, press the S button once to display "oFR1" (or continue pressing to select other alarm groups). Use the UP button to switch to the "onR1" display to activate the alarm. Press and hold the S button for 2 seconds to enter the alarm clock setting. Adjust the time using the UP and DOWN buttons, then press the S button to switch to the minute setting. Press the S button again to exit the setting mode.
When the alarm rings, you can touch any button to turn it off. If there is no operation, the alarm will enter snooze mode for 10 minutes. After snooze mode finishes, the alarm will ring again. After snooze mode repeats 3 times, it will turn off automatically.
For more detailed instructions and information, please refer to the GoGEN Baby Light Alarm Clock user manual.
Add New Comment