User Manual Q&AAnswer
Jan 21, 2025 - 04:10 AM
To properly inflate the Coleman CAMPINGAZ Airbed Single / Double, follow these steps:
1. Open the valve (A) on the airbed.
2. Pull the external stopper (B) to extend the valve out.
3. If using a Campingaz® / Coleman® pump, attach the adapter nozzle of the pump to the airbed valve by twisting it gently. Turn on the pump to inflate (C). If using a foot pump or other inflation device, make sure the nozzle fits snugly into the extended valve.
4. When the airbed is fully inflated, seal the valve by pushing in with the pump nozzle.
5. Gently twist the adapter sleeve to the right, backing the pump out of the valve while maintaining the seal (D).
6. Close the external stopper, and the valve should appear depressed into itself (E).
To deflate the airbed, you have two options:
1. Using a Campingaz® / Coleman® pump: Remove the adapter nozzle from the inflation end and attach it to the opposite deflation side of the pump. Repeat the same steps as inflation, and the air will be drawn out quickly (F).
2. Without using a pump: Open the external stopper and pull it to extend out, allowing the air to escape (B). When the airbed is fully deflated, close the stopper.
Please note that a pump is sold separately, and it is important to read and follow the instructions in the manual carefully to ensure proper usage and avoid any damage to the airbed.
Add New Comment