User Manual Q&AAnswer
Jan 21, 2025 - 04:08 AM
To mirror your laptop or mobile device using the j5create JVAW62 ScreenCast USB-C Wireless Display HDMI Extender, follow these steps:
1. Plug the JVAW62 TX into a USB-C port on your laptop or mobile device.
2. Wait for a few seconds until the flashing light on the JVAW62 TX stops.
3. The mirroring should start automatically. However, if the JVAW62 TX continues to flash for more than 20 seconds, follow the next step.
4. Unplug the JVAW62 TX from the USB-C port and then plug it back in.
5. If the flashing light on the JVAW62 TX continues for more than 20 seconds again, it needs to be paired with the JVAW62 RX.
6. Refer to the "How to pair the JVAW62 TX with the receiver" section in the user manual for instructions on how to pair the TX with the RX.
Note: The JVAW62 TX supports mirroring for laptops and mobile devices running Windows, macOS, iPadOS, and Android operating systems. Additionally, the USB-C port on the device must support DP output for mirroring to work properly.
If you are still experiencing issues or need further assistance, please consult the troubleshooting section in the user manual or visit the j5create website for support.
Add New Comment