User Manual Q&AAnswer
Jan 21, 2025 - 04:05 AM
To start the Einhell TC-PG 65/E5 Power Generator, follow these steps:
1. Check the fuel level and top it up if necessary.
2. Make sure that the generator has sufficient ventilation.
3. Set the ON/OFF switch to the "ON" position.
4. Move the choke lever to position I Ø I.
5. Start the engine by turning the ignition key in the ignition lock. Once the engine has started, turn the ignition key immediately back to its initial position.
6. Push the choke lever back after the engine has started.
Note: If you are using the reversing starter, follow the same steps but instead of using the ignition key, pull the handle of the reversing starter forcefully.
Please refer to the "Operation" section of the manual for more detailed instructions and safety precautions.
Add New Comment