User Manual Q&AAnswer
Jan 21, 2025 - 03:59 AM
To change the accessories on the DREMEL DSM20 Compact Circular Saw, follow these steps:
1. Disconnect the plug from the power source before making any changes to the tool.
2. Turn the lock bolt with the wrench provided clockwise to loosen and remove the lock bolt and outer washer.
3. If the shaft moves while attempting to loosen the lock bolt, press the spindle lock to keep the shaft in place.
4. Slide the desired accessory, such as the standard wheel or flush cutting wheel, behind the guard face and mount it against the inner washer on the spindle shaft.
5. If using the flush cutting wheel, place it against the inner washer on the spindle shaft.
6. Install the outer washer and tighten the lock bolt finger tight.
7. Press the spindle lock to lock the shaft in place and tighten the lock bolt counter-clockwise until tight using the wrench provided.
Please refer to the "CHANGING ACCESSORIES" section in the Instruction Manual for more detailed instructions and illustrations.
Add New Comment