User Manual Q&AAnswer
Jan 21, 2025 - 03:45 AM
To select the desired output voltage for the power supply, follow these steps:
1. Make sure the power cord is unplugged from the mains and there is no load connected to the unit.
2. Use the switching key to turn the voltage mode switch. The switch has seven voltage values printed in a circle around it.
3. Rotate the voltage mode switch until the arrow points to the voltage value that corresponds to the input voltage of your load.
4. The voltage mode switch should click into place, indicating that the desired output voltage has been set.
Note: It is important to turn on the output voltage only when there is no load connected to the power supply. Also, make sure to observe the operating voltage of the connected load to avoid any issues.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment