How do I install the ELCO Lighting ERT612CT5W 6 Inch Ultra Slim LED Round Panel Light? (ELCO Lighting ERT612CT5W LED Round Panel Instruction Guide)

Answer

manuals.plus

Jan 21, 2025 - 03:43 AM

To install the ELCO Lighting ERT612CT5W 6 Inch Ultra Slim LED Round Panel Light, please follow these steps:

1. Determine the installation type: This fixture can be used for both new construction and remodel applications.

2. New Construction Installation:
a. Prepare the ceiling by cutting a hole according to the provided hole cut-out template. The maximum hole size should not exceed 4 1/4" for this product.
b. Install a mounting plate or frame suitable for new construction applications.
c. Connect the panel light to the mounting plate or frame using the provided instructions.

3. Remodel Installation:
a. Prepare the ceiling by cutting a hole according to the provided hole cut-out template. The maximum hole size should not exceed 4 1/4" for this product.
b. No additional accessories are required for remodel applications.
c. Insert the panel light into the hole and secure it using the high-strength steel spring clip provided.

4. Wiring:
a. Connect the driver included with the panel light to a 120V power supply.
b. Ensure proper electrical connections and follow local electrical codes.

5. Dimming:
a. The panel light is dimmable with Triac/ELV type dimmers.
b. Refer to the ELM System Dimmer Compatibility List for a full list of compatible dimmers.

Please note that these are general installation instructions. For specific details and guidelines, refer to the ELCO Lighting ERT612CT5W 6 Inch Ultra Slim LED Round Panel Light instructions manual provided with the product.