User Manual Q&AAnswer
Jan 21, 2025 - 03:28 AM
To install the Kogan KAWFSWT1GA Smarterhome Touch Light Switch Gang, it is recommended to hire a qualified professional electrician. Incorrect installation can lead to electric shock or fire. Please read all instructions and safety information provided in the user guide before installation. Here are the general steps for installation:
1. Open the switch cover carefully using a flat head screwdriver with a tip that is at least 5mm wide.
2. Wire the switch correctly according to the provided diagram.
3. Tighten the screws to secure the wiring.
4. Cover the panel and connect the power.
5. After the power is on, wait for 3 seconds and then press the switch.
Please note that this manual is not intended to instruct or assist untrained or unqualified persons in installing this light switch. It is the responsibility of a qualified, licensed installer and user to apply common sense and care during installation and operation.
For more detailed instructions and diagrams, please refer to the user guide provided with the product.
Add New Comment