User Manual Q&AAnswer
Jan 21, 2025 - 03:20 AM
To change the battery in the BOSS DC-2W Dimension Chorus Effect Pedal, follow these steps:
1. Hold down the pedal and loosen the thumbscrew located on the bottom of the pedal.
2. Open the pedal upward. The pedal can be opened without detaching the thumbscrew completely.
3. Remove the old battery from the battery housing and disconnect the snap cord connected to it.
4. Connect the snap cord to the new battery, making sure to observe the battery's polarity (+ versus -).
5. Place the new battery inside the battery housing.
6. Slip the coil spring onto the spring base on the back of the pedal.
7. Close the pedal, being careful to avoid getting the snap cord caught in the pedal, coil spring, and battery housing.
8. Hold down the pedal while tightening the thumbscrew into the guide bush hole.
Please refer to the "Changing the Battery" section in the owner's manual for visual illustrations and additional information.
Add New Comment