User Manual Q&AAnswer
Jan 21, 2025 - 03:05 AM
To connect the Sunfire HRS8 subwoofer to your home theater system, you have a few options depending on the outputs available on your receiver or processor. Here are the steps to follow:
1. Determine the type of outputs on your receiver or processor: Check if your receiver or processor has a dedicated subwoofer output (Sub/LFE) or line-level outputs.
2. If your receiver or processor has a subwoofer output (Sub/LFE): Connect one end of an RCA cable to the subwoofer output on your receiver or processor, and the other end to the left input jack on the Sunfire HRS8 subwoofer. This is the simplest and recommended connection.
3. If your receiver or processor does not have a subwoofer output: You can use "Y" cables (or Y adaptors) to send the left and right main outputs from your receiver or processor to both the subwoofer and your amplifier. Connect the left and right RCA cables from the main outputs of your receiver or processor to the left and right input jacks on the Sunfire HRS8 subwoofer.
4. Adjust the settings on your receiver or processor: If your receiver or processor has a bass management system, make sure it is correctly set to redirect the bass to the subwoofer. You may also need to adjust the subwoofer level and crossover frequency controls on your receiver or processor for optimal performance.
5. Power on the subwoofer: Once you have made the connections, turn on the subwoofer using the power switch on the control panel. The subwoofer has an automatic signal-sensing turn-on feature, so it will turn on when it detects an audio signal.
By following these steps and referring to the user manual for further details, you should be able to successfully connect your Sunfire HRS8 subwoofer to your home theater system.
Add New Comment