User Manual Q&AAnswer
Jan 21, 2025 - 02:36 AM
To connect your Optoma TX615 DLP Projector to your computer, follow these steps:
1. Make sure both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on your computer. The TX615 projector supports both VGA and HDMI connections.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your computer and the projector.
7. Press the "Source" button on the projector's remote control or on the control panel of the projector itself.
8. Use the arrow buttons on the remote control or control panel to select the appropriate input source (VGA or HDMI).
9. Once the input source is selected, your computer's display should appear on the projector screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Optoma TX615 DLP Projector.
Add New Comment