User Manual Q&AAnswer
Jan 21, 2025 - 02:36 AM
To install the HI-CLOUD TLS360 Portable 3D Laser Scanner, follow these steps:
1. Battery Installation:
- Ensure that the battery is turned off.
- Install the battery into the battery compartment of the scanner in the direction shown by the arrow.
- Gently push the battery inward until the buckle is fastened.
2. Camera Installation:
- Ensure that the scanner host is turned off.
- Install the camera component into the top of the host in the direction shown in the manual.
- Tighten the screws on both sides of the camera component by hand.
3. RTK Installation:
- Ensure that the scanner host is turned off.
- Install the RTK components on the top of the host in the direction shown in the manual.
- Tighten the screws on both sides of the RTK component by hand.
4. Battery Compartment Installation:
- Install the battery compartment into the battery compartment chute of the carbon fiber tripod in the direction of the arrow shown in the manual.
- Gently push it down and clamp it until you hear a "click".
5. Host Installation:
- Ensure that the scanner host is turned off.
- Place the host on the top of the carbon fiber tripod.
- Roughly align the center hole at the bottom of the host with the center hole of the tripod fixing platform.
- Tighten the hand xxxx nut at the bottom of the tripod fixing platform to fix the host with the carbon fiber tripod.
Please refer to the HI-CLOUD TLS360 Portable 3D Laser Scanner User Manual for detailed illustrations and additional information on the installation process.
Add New Comment