User Manual Q&AAnswer
Jan 21, 2025 - 02:21 AM
To connect the Hama 217219 Bluetooth Keyboard with Touchpad to your device, follow these steps:
1. Ensure that your Bluetooth-enabled device is switched on and that the Bluetooth function is activated.
2. Slide the [OFF/ON] switch on the keyboard to the ON position. The Power LED will light up blue for approximately 2-5 seconds.
3. Press and hold the key combination fn+C simultaneously for approximately 2-5 seconds to start the pairing process.
4. The Bluetooth status LED will light up blue once the keyboard is successfully connected to the device.
5. Open the Bluetooth settings on your device and wait until the list of found Bluetooth devices shows "Hama BT keyboard".
6. Select "Hama BT keyboard" from the list and follow the instructions on your device, if necessary, to complete the pairing process.
7. Once the keyboard is displayed as connected in the Bluetooth settings of your device, you can start using the Bluetooth keyboard.
Note: If the device is disconnected from the Bluetooth keyboard or the device is switched off, the keyboard will automatically switch to sleep mode after 10 minutes. Pressing any button will automatically re-establish the Bluetooth connection. If the Bluetooth connection fails or is unstable, try charging the device for at least 5 minutes and then try again.
Please refer to the operating instructions of your device for more information on Bluetooth settings and pairing procedures.
Add New Comment