User Manual Q&AAnswer
Jan 21, 2025 - 02:18 AM
According to the instruction manual, the dustbag should be replaced when the full bag indicator (A8) is permanently colored. If the indicator is activated occasionally while vacuuming, you can ignore it. As for the filters, it is recommended to clean or replace them after approximately five dustbag replacements. However, if you are vacuuming very fine dust, the dustbag and filter pores may get clogged, reducing suction performance. In such cases, it is advised to replace the dustbag and clean or replace the filters as soon as possible, even if the dustbag is not yet full. The input filters (A13) can be rinsed under running water and allowed to dry before re-use. The input HEPA filter (A15) can be gently shaken out or blown out, and if very dirty, it can be rinsed under running lukewarm water. However, cleaning the HEPA filter with water will deteriorate its filtration properties, and it can only be washed up to three times before needing replacement. It is recommended to replace the HEPA filter twice a year.
Add New Comment