User Manual Q&AAnswer
Jan 21, 2025 - 02:14 AM
To adjust the torque level on the Makita XFD13 Cordless Driver Drill, you need to use the adjusting ring located on the tool. The adjusting ring has 21 levels of torque settings. Here's how to do it:
1. Switch off the tool and remove the battery cartridge.
2. Locate the adjusting ring on the front of the tool, near the chuck.
3. Turn the adjusting ring to align the desired torque level with the arrow on the tool body. The torque levels are indicated by numbers on the adjusting ring.
4. The clutch will slip at various torque levels when set at the numbers 1 to 20. The higher the number, the higher the torque setting.
5. Before actual operation, drive a trial xxxx into your material or a piece of duplicate material to determine which torque level is required for a particular application.
Remember to adjust the torque level according to the type of material and the size of the xxxx you are using. Using the correct torque setting will help prevent over-tightening or stripping of screws.
Add New Comment