User Manual Q&AAnswer
Jan 21, 2025 - 01:48 AM
To configure the LAN settings on the Peplink PEPWAVE P1MT01 router, follow these steps:
1. Go to the "Network" tab at the top of the page and then click on "Network Settings" on the left-side tab.
2. Click on "Untagged LAN" to open the LAN settings page.
3. Change the IP address to 192.168.50.2.
4. In the DHCP Server section, uncheck the checkbox to disable the DHCP Server.
5. Click on "Save and Apply Changes" to save the settings.
These steps will configure the LAN settings on the Peplink PEPWAVE P1MT01 router.
Add New Comment