User Manual Q&AAnswer
Jan 21, 2025 - 01:10 AM
To connect the WOGREE S60 Wireless Sound Bar to your TV, you have two options: optical and AUX.
1. Optical Connection:
- Turn off the sound bar and TV.
- Connect the sound bar to the TV using the optical cable (remove the protective cap from the optical cable).
- Turn on the sound bar and press the mode button on the sound bar remote to select "OPT" on the LED display.
- Turn on the TV and go to the TV settings. Select "audio" or "sound" and then choose "external speaker" to turn off the TV speaker.
- In the audio settings, select "digital audio output" or "optical" and choose "PCM" as the output format.
- Play a TV show to test the sound bar.
2. AUX Connection:
- Use the 3.5mm to 3.5mm cable (supplied) to connect the sound bar's AUX jack to your TV's headphone jack.
- Alternatively, you can use an RCA to 3.5mm cable (not supplied) to connect the sound bar's AUX jack to your TV's AUX (L/R, red and white) jack.
- Choose one way to connect and then turn on the sound bar.
- Press the mode button on the sound bar remote to select "AUX" on the LED display.
- Turn on the TV and go to the TV settings. Select "audio" or "sound" and choose "external speaker" to turn on the TV speaker.
- Play a TV show to test the sound bar.
Note: The TV settings may vary depending on the TV model. If the listed methods do not work or your TV is not listed, please contact WOGREE support or the TV manufacturer for further assistance.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment