User Manual Q&AAnswer
Jan 21, 2025 - 01:08 AM
To set up and operate the Gude GEH 3300 F Electric Heater, please follow these steps:
1. Place the electric heater in the center of the room, if possible, or at least 1 meter away from the wall to achieve optimum heat distribution. Keep all windows and doors closed.
2. Plug the mains cable into a suitable socket. Make sure that your mains network is appropriately fused.
3. Set the desired power level using the power setting controller.
4. To switch off the electric heater, set the power setting controller to the fan position for 3-5 minutes. The device can then be switched off or unplugged.
5. After switching off the device, allow it to cool down before storing it.
Please note the following safety instructions:
- The heater should only be operated indoors where there is protection from moisture.
- This device is intended for heating in private households and is not suitable for commercial or industrial purposes.
- The heater is only suitable for well-insulated rooms or occasional use.
- Observe local building and fire protection regulations, electrical safeguards, and specifications from the German Employers' Liability Insurance Association.
- Do not install the device in rooms at risk of explosions and fire.
- The heater is not intended for drying clothing or for installation under benches or in floor trenches.
- Do not use the device in animal husbandry or animal breeding.
- Never set up the device on long-pile carpets.
- Follow all safety warnings and instructions to prevent electric shock, fire, and serious injury.
For further technical questions, claims, spare parts, or operating instructions, you can contact Gude customer support at:
- Tel.: +49 (0) 79 04 / 700-360
- Fax: +49 (0) 79 04 / 700-51999
- Email: support@ts.guede.com
Please refer to the Gude GEH 3300 F Electric Heater manual for more detailed information and instructions.
Add New Comment