How do I install the POOLEX Nano Action Reversible 5 kW Heat Pump? (POOLEX Nano Action Reversible 5 kW heat pump Owner's Manual)

Answer

manuals.plus

Jan 21, 2025 - 01:02 AM


To install the POOLEX Nano Action Reversible 5 kW Heat Pump, follow these steps:

1. Choose a suitable location for the heat pump that is at least 2.5 meters away from the swimming pool. Ensure that the location is easily accessible for operation and maintenance, and that it is properly ventilated.

2. Install the heat pump on a stable, level concrete floor. Make sure the floor can support the weight of the unit.

3. Connect the hydraulic inlet and outlet connectors to the heat pump using the provided connectors.

4. Connect the water outlet pipe and the water intake pipe to the heat pump.

5. Connect the heat pump to the electrical supply. Ensure that the plug is connected to the ground and that the electrical installation is in proper working condition.

6. Activate the circulating pump and the heat pump's power supply protection (differential switch and circuit-breaker).

7. Press the ON/OFF button on the control panel to activate the heat pump.

8. Select the desired operating mode (heating or cooling) using the Mode button.

9. Adjust the temperature using the Plus (+) and Minus (-) buttons.

10. Wait for the heat pump to reach the desired temperature.

Please note that these are general installation instructions. It is important to consult the POOLEX Nano Action Reversible 5 kW Heat Pump Owner's Manual for specific details and safety precautions.