Answer

Jan 21, 2025 - 12:58 AM
To connect the COLORado PXL Bar 8 to a DMX controller, you will need a 5-pin IP-rated DMX serial connection. Here are the steps to follow:
1. Make sure both the COLORado PXL Bar 8 and the DMX controller are powered off.
2. Connect one end of the DMX cable to the DMX output of the controller.
3. Connect the other end of the DMX cable to the DMX input of the COLORado PXL Bar 8.
4. Ensure that the DMX cable is securely connected and tightened.
5. Power on the DMX controller and the COLORado PXL Bar 8.
Once the connection is established, you can use the DMX controller to control the functions and settings of the COLORado PXL Bar 8. Please refer to the User Manual for detailed information on how to program and control the fixture using DMX.
Note: It is important to use a properly rated DMX cable and ensure that the DMX addresses are set correctly on both the controller and the fixture to ensure proper communication.
Add New Comment