How do I install the LARSON Escape 100 Single Door Screen? (LARSON Escape 100 Single Door Screen User Guide)

Answer

manuals.plus

Jan 21, 2025 - 12:56 AM


To install the LARSON Escape 100 Single Door Screen, follow these steps:

1. Measure the opening width and height and ensure it falls within the size range indicated on the packaging.
2. Decide on the placement of the screen cassette within the door frame, considering the side of the door hinges.
3. Attach the boot body end cap to the top end of the screen cassette assembly.
4. Install recess mounting clips on the door frame, 20" from the top and bottom of the opening.
5. Snap the screen cassette onto the mounting clips.
6. Cut the top guide rail and bottom guide rail to the appropriate lengths based on the opening width.
7. Install the top guide rail end cap and slide the bottom guide rail onto the screen cassette end cap.
8. Slide the boot body upward on the screen cassette and slide the top guide rail onto the boot body end cap.
9. Install the bottom guide rail directly on a flat threshold/sill or use shims for a sloped threshold/sill.
10. Slide the side rail behind and over the bottom guide rail, ensuring it fits inside the flanges of the top guide rail.
11. Install the threshold transition (optional) and secure the bottom guide rail, top guide rail, and side rail with screws.
12. Adjust the top retainer guide and handles for proper positioning.
13. Enjoy your new LARSON Escape 100 Single Door Screen.

For more detailed instructions and illustrations, please refer to the LARSON Escape 100 Single Door Screen User Guide.