How do I assemble and install the LeuchtenDirekt 11310-18 Table Lamp? (LeuchtenDirekt 11310-18 Table Lamp Instruction Manual)

Answer

manuals.plus

Jan 21, 2025 - 12:48 AM


To assemble and install the LeuchtenDirekt 11310-18 Table Lamp, please follow the steps provided in the instruction manual. Here is a step-by-step guide:

1. Unpack all the components from the packaging and ensure that you have all the necessary parts.

2. Place the lamp base on a stable surface and attach the lamp rod to the base by screwing it in clockwise until it is securely attached.

3. Take the lampshade and remove any protective packaging. Carefully align the holes on the lampshade with the corresponding holes on the lamp rod.

4. Insert the screws provided through the holes on the lampshade and tighten them using a screwdriver. Make sure the lampshade is securely attached to the lamp rod.

5. Once the lamp is fully assembled, locate the power cord at the bottom of the lamp base. Connect the power cord to a suitable electrical outlet.

6. Turn on the lamp using the switch located on the lamp base or cord, depending on the model.

Please refer to the detailed installation instructions provided in the LeuchtenDirekt 11310-18 Table Lamp instruction manual for any specific variations or additional information.

If you have any further questions or encounter any difficulties during the assembly or installation process, please contact LeuchtenDirekt GmbH's customer service at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de. They will be able to provide you with further assistance and support.