User Manual Q&AAnswer
Jan 21, 2025 - 12:44 AM
To attach the andi be free® Vent Mount Charger to your car's vent, follow these steps:
1. Inspect the hook mechanism of the charger to ensure compatibility with your car's ventilation system. The hook should fit through the fins of the vent.
2. Insert the hooking mechanism through the lowest slat of the ventilation grille and hook it securely.
3. Turn the rotating mechanism until it is firmly fixed to the vent. Be careful not to overtighten, as it may cause damage to the vent slats.
4. If needed, adjust the position of the charging head by loosening the xxxx nut behind it. Tilt the charging head to your desired position and tighten the xxxx nut again.
Please refer to the instruction manual for visual illustrations and further details on attaching the Vent Mount Charger to your car's vent.
Add New Comment