User Manual Q&AAnswer
Jan 21, 2025 - 12:09 AM
To install the , please follow the steps outlined in the instruction manual provided. Here is a summary of the installation process:
1. Preparation: Read the mounting instructions carefully and ensure that all parts listed in the part list are included. Park your vehicle safely and turn off the engine. Disconnect the vehicle battery if working on the electrical system. Use appropriate tools and have another person to assist you if needed.
2. Mounting: Start by removing the original footrest. Clean the footrest holder thoroughly and apply grease to the inside of the footrest holder and the original pin. Attach the hinge adapter with the original parts to the footrest mount. Make sure the beveled surface of the hinge adapter is facing upwards. Insert the positioning cone onto the star-shaped cone of the hinge adapter. The height and inclination angle of the EVO footrest can be adjusted by the various mounting positions and the toothing of the positioning cone. Attach the EVO footrest loosely to the hinge adapter, ensuring alignment and ergonomics. Then, tighten the screws as specified in the parts list. Optionally, attach the rubber pad to the EVO footrest.
3. Function Check: After installation, ensure that all parts and connections are properly replaced. Check that no moving parts are obstructed and that the vehicle's functions are not hindered. Cables and hoses should not rub or be pinched. Before riding, perform a comprehensive check of all functions. After the first 50 km and at regular intervals, check the tightening torque of all xxxx connections and the proper fit of the product.
Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed and accurate installation steps.
Add New Comment