User Manual Q&AAnswer
Jan 20, 2025 - 11:57 PM
To pair your Jabra Evolve2 75 True Wireless Headset with your device, please follow these steps:
1. Ensure that your headset is charged and turned on.
2. Put the headset in pairing mode by pressing and holding the Bluetooth button on the right earcup until the LED light starts flashing blue.
3. On your device, go to the Bluetooth settings and make sure Bluetooth is turned on.
4. Search for available Bluetooth devices and select "Jabra Evolve2 75" from the list.
5. If prompted, enter the PIN code "0000" to complete the pairing process.
6. Once the pairing is successful, the LED light on the headset will turn solid blue.
Note: If you are still experiencing difficulties pairing your headset, you can try resetting the headset by following these steps:
1. Make sure the headset is turned off.
2. Press and hold the Bluetooth and ANC buttons simultaneously for 5 seconds until the LED light flashes purple.
3. The headset will then turn off and can be turned back on to attempt the pairing process again.
If you continue to experience issues with pairing your Jabra Evolve2 75 True Wireless Headset, I recommend referring to the user manual or contacting Jabra customer support for further assistance.
Add New Comment