User Manual Q&AAnswer
Jan 20, 2025 - 11:54 PM
The MISA M-2A20-F Freezer Room is designed with a patented "fast fit" twin hook CAMLOCK system, which allows for easy assembly and disassembly without the need for sealants. Here is a step-by-step guide on how to assemble and disassemble the freezer room:
Assembly:
1. Start by laying out the floor panels in the desired location.
2. Connect the wall panels to the floor panels using the fast fit CAMLOCK system. The panels should easily slot together using the twin hook mechanism.
3. Continue connecting the wall panels until the desired size and shape of the freezer room is achieved.
4. Install the ceiling panels by connecting them to the top of the wall panels using the CAMLOCK system.
5. Once all the panels are securely connected, install the hinged door(s) using the provided instructions.
6. Connect the electrical components, such as the lighting and temperature controller, according to the manufacturer's instructions.
7. Ensure that all panels are properly aligned and sealed to maintain the desired temperature inside the freezer room.
Disassembly:
1. Start by disconnecting the electrical components and removing any fixtures or accessories inside the freezer room.
2. Begin disassembling the room by unlocking the CAMLOCK system. This can be done by releasing the twin hook mechanism on each panel.
3. Carefully remove the ceiling panels first, followed by the wall panels, and finally, the floor panels.
4. Store the disassembled panels in a safe and dry location to prevent any damage.
It is important to refer to the user manual provided by the manufacturer for detailed instructions specific to the MISA M-2A20-F Freezer Room.
Add New Comment