User Manual Q&AAnswer
Jan 20, 2025 - 11:30 PM
To connect the cable of the vehicle to the cable set, follow these steps:
1. Take the cable of the vehicle (green marked) and strip the insulation at one point using a suitable tool.
2. Take the cable of the cable set (yellow marked) and strip the insulation at the end.
3. Twirl the wires of the stripped cable together.
4. Place the end of the cable you want to connect under the stripped point of the vehicle's cable.
5. Wrap the cable you want to connect around the vehicle's cable.
6. Lastly, stick insulating tape around the connection point.
Please refer to Table 1 in the instruction manual for a visual representation of these steps.
Note: If the cable set consists exclusively of grey wires, connect the wires according to the cable inscription.
Add New Comment