How do I install and set up the level one POR 1200 Outdoor PoE Plus Repeater? (level one POR 1200 Outdoor PoE Plus Repeater Instruction Guide)

Answer

manuals.plus

Jan 20, 2025 - 11:08 PM


To install and set up the level one POR 1200 Outdoor PoE Plus Repeater, please follow the steps below:

1. Determine the optimal location: Choose a suitable location for the repeater that is within the range of your PoE devices and provides a stable network connection.

2. Connect the repeater: Connect one end of an Ethernet cable to the "IN" port of the repeater and the other end to the PoE switch or injector. Make sure the connection is secure.

3. Connect the devices: Connect your PoE device to one of the "OUT" ports of the repeater using an Ethernet cable. If you have a non-PoE device, connect it to the other "OUT" port.

4. Power on the devices: Ensure that the PoE switch or injector is powered on. The repeater will receive power from the switch or injector, eliminating the need for an additional power supply.

5. Verify the connection: Check the indicators on the repeater to ensure that power and data are being transmitted correctly. The Power, PoE In, and PoE Out 1 indicators should be lit up.

6. Test the connection: Verify that your PoE devices are receiving power and data by checking their functionality. You should now have an extended PoE network with increased range.

For more detailed instructions and troubleshooting information, please refer to the POR 1200 Outdoor PoE Plus Repeater Quick Installation Guide provided in the package.