How do I install the KUFATEC Cable Loom Lane Change Assistant Side Assist? (KUFATEC Cable Loom Assistant Side Assist Instruction Manual)

Answer

manuals.plus

Jan 20, 2025 - 11:03 PM

To install the KUFATEC Cable Loom Lane Change Assistant Side Assist, follow these steps:

1. Start by identifying the components mentioned in the illustration:
- Sensor (1)
- Connection ground (2)
- Connection power supply, Can-Bus (3)
- Warning light (4)

2. Lay the cable set in the most convenient and shortest way possible, keeping in mind the cable routing described in the manual.

3. Connect the sensor (1) to the appropriate location on your vehicle. The exact location will depend on the make and model of your vehicle, so refer to the relevant sections of the manual for specific instructions.

4. Connect the connection ground (2) and connection power supply, Can-Bus (3) to the corresponding terminals or connectors on your vehicle. Again, refer to the manual for detailed instructions on the specific connections for your vehicle.

5. Install the warning light (4) in a visible location on your vehicle's dashboard or instrument cluster. Ensure that it is securely mounted and easily visible to the driver.

6. Once all the components are connected and installed, test the Lane Change Assistant Side Assist to ensure it is functioning correctly. Follow any additional instructions provided in the manual for testing and calibration.

For a more detailed description of the cable routing and installation process, please refer to the relevant sections of the KUFATEC Cable Loom Lane Change Assistant Side Assist Instruction Manual. If you have any specific questions or encounter any issues during the installation process, you can contact Kufatec GmbH & Co. KG for further assistance at info@kufatec.de.