How do I install and set up the CONCEPTRONIC POR 1222 2 Port Gigabit PoE Plus Repeater? (CONCEPTRONIC POR 1222 Gigabit PoE Plus Repeater Instruction Guide)

Answer

manuals.plus

Jan 20, 2025 - 10:51 PM


To install and set up the CONCEPTRONIC POR 1222 2 Port Gigabit PoE Plus Repeater, please follow these steps:

1. Determine the ideal location for the repeater, keeping in mind that it should be within the range of your existing PoE network and the devices you want to connect.

2. Ensure that you have a compatible Gigabit PoE-Plus switch or Power Sending Equipment (PSE) to provide power to the repeater.

3. Connect one end of an Ethernet cable to the "IN" port of the POR-1222 repeater and the other end to the PoE-enabled switch or PSE.

4. Connect additional Ethernet cables from the "OUT" ports of the repeater to the devices you want to extend the PoE connection to.

5. Make sure that the power and data cables are securely connected.

6. Power on the PoE switch or PSE to provide power to the repeater and the connected devices.

7. The repeater should automatically detect and forward the Power over Ethernet (PoE) to the remote devices. You should see the Power and PoE indicators on the repeater light up.

8. Verify that the extended PoE connection is working by checking if the devices connected to the repeater are receiving power and functioning properly.

Note: The POR-1222 repeater does not require any additional power supply as it receives power from the PoE switch or PSE.

For more detailed instructions and troubleshooting tips, please refer to the "Quick Installation Guide" provided in the package contents of the CONCEPTRONIC POR 1222 2 Port Gigabit PoE Plus Repeater.