User Manual Q&AAnswer
Jan 20, 2025 - 10:32 PM
To connect the KUFATEC BMW X1 E84 Active Exhaust Sound Booster to your vehicle, please follow the steps outlined in the instruction manual provided.
1. Start by stripping the insulation of the vehicle's cable that you want to connect to (green marked in the manual) at one point using a suitable tool.
2. Strip the insulation at the end of the cable from the KUFATEC cable set that you want to connect (yellow marked in the manual).
3. Twirl the wires of the stripped cable together.
4. Place the end of the KUFATEC cable you want to connect under the stripped point of the vehicle's cable.
5. Wrap the KUFATEC cable around the vehicle's cable.
6. Secure the connection point by wrapping insulating tape around it.
Please note that if the KUFATEC cable set consists exclusively of grey wires, connect the wires according to the cable inscription.
For more detailed instructions on the installation process, including the removal of trim panels, connection of CAN High & Low, ground, ignition lead, routing of the connecting cable for the sound generator, installation of the sound generator and pushbutton, and additional safety measures, please refer to the complete instruction manual provided by KUFATEC.
It is important to follow the instructions carefully and ensure that you have the necessary technical knowledge or seek assistance from trained qualified personnel to perform the installation.
Add New Comment