User Manual Q&AAnswer
Jan 20, 2025 - 10:29 PM
To install the KUFATEC Complete Set PDC Front, please follow the assembly instructions provided in the manual. Here is a step-by-step guide:
1. Start by locating the PDC control unit (1), warning buzzer front (2), button (3), and PDC sensors front (4) as shown in the illustration.
2. Lay the cable set in the most convenient and shortest way possible, ensuring that it reaches all the necessary components.
3. For detailed instructions on cable routing, refer to the relevant sections of the manual.
4. Connect the PDC control unit (1) to the appropriate connectors in your vehicle. Refer to the manual for specific instructions on connector locations.
5. Install the warning buzzer front (2) in a suitable location, ensuring it is securely mounted.
6. Mount the button (3) in a convenient and accessible location within your vehicle.
7. Install the PDC sensors front (4) at the desired positions on the front of your vehicle. Refer to the manual for guidance on sensor placement.
8. Once all components are installed and connected, test the PDC system to ensure proper functionality. Follow the instructions in the manual for testing procedures.
If you encounter any difficulties during the installation process or have any specific questions, please refer to the manual for further guidance or contact Kufatec GmbH & Co. KG directly at info@kufatec.de for additional support.
Add New Comment