User Manual Q&AAnswer
Jan 20, 2025 - 10:25 PM
To connect and set up the CONCEPTRONIC FEP 1612W380 16 Port Fast Ethernet PoE Switch, please follow these steps:
1. Connect the power cable: Plug one end of the power cable into the power socket on the switch and the other end into a power outlet.
2. Connect the Ethernet cables: Use Ethernet cables to connect your devices (such as computers, printers, IP cameras, etc.) to the switch's Ethernet ports. Plug one end of the Ethernet cable into the Ethernet port on your device and the other end into one of the available Ethernet ports on the switch.
3. Optional: If you have devices that require power over Ethernet (PoE), connect them to the PoE ports on the switch. These ports are labeled as PoE and are capable of providing power to compatible devices without the need for separate power adapters.
4. Power on the switch: Use the power switch (Dip switch) located on the front or back of the switch to turn it on. The power indicator should light up once the switch is powered on.
5. Verify connectivity: Check the indicators on the switch to ensure that the power, active, 10/100M, and PoE indicators are lit up for the respective ports and functions.
6. Configuration (if required): By default, the switch should work without any additional configuration. However, if you need to make specific changes or customize settings, you can access the switch's management interface using a web browser. Refer to the user manual for detailed instructions on accessing and configuring the switch's settings.
Please note that the above steps are a general guideline, and it's always recommended to refer to the user manual provided with the switch for detailed and specific instructions.
Add New Comment