User Manual Q&AAnswer
Jan 20, 2025 - 10:17 PM
To install and use the CONCEPTRONIC 128952 4 Ports Travel USB Hub, please follow these steps:
1. Ensure that your PC or notebook is powered on and running.
2. Locate an available USB port on your PC or notebook.
3. Take the USB cable provided with the hub and connect one end to the USB port on your PC or notebook.
4. Connect the other end of the USB cable to the USB input port on the hub.
5. Once connected, the hub will start receiving power from your PC or notebook.
6. Now, you can connect your USB devices to the available USB ports on the hub. You can connect up to four USB devices simultaneously.
7. The hub is designed to provide power individually to each port, so you can use all ports at the same time.
8. The hub is suitable for low power USB devices. Make sure not to connect high-power devices that may exceed the power capabilities of the hub.
9. The hub is plug-and-play, which means it should be automatically recognized by your PC or notebook without the need for additional software or drivers.
10. Once connected, you can start using your USB devices as you normally would.
Please note that the CONCEPTRONIC 128952 4 Ports Travel USB Hub is compatible with various operating systems, including Windows 7, Windows 8, Windows 10, Mac OS X 10.6 and higher, and Chrome OS.
For more detailed information or troubleshooting, please refer to the user manual provided with the product.
Add New Comment