User Manual Q&AAnswer
Jan 20, 2025 - 10:15 PM
To install the CONCEPTRONIC 650371 Ceiling Mount Triple Screen TV Bracket, please follow the steps below:
1. Ensure that you have all the necessary tools and hardware for installation, including a drill, screwdriver, and the included screws.
2. Determine the desired location for mounting the bracket on the ceiling. Make sure the ceiling is strong enough to support the weight of the bracket and the TVs.
3. Use a stud finder to locate the ceiling joists or use appropriate anchors if mounting on a concrete or drywall ceiling.
4. Mark the mounting hole locations on the ceiling using the bracket as a template. Ensure that the marks are level and aligned properly.
5. Drill pilot holes at the marked locations using an appropriate drill bit size for the screws you will be using.
6. Attach the bracket to the ceiling using the provided screws. Make sure the bracket is securely fastened to the ceiling.
7. Attach the TVs to the bracket using the VESA mounting holes on the back of each TV. Ensure that the TVs are properly aligned and securely attached.
8. Use the integrated bubble level on the bracket to ensure that the TVs are level and aligned correctly.
9. Adjust the tilt and swivel of each TV using the adjustment knobs on the bracket to achieve the desired viewing angle.
10. Once the TVs are properly positioned, tighten the adjustment knobs to secure the tilt and swivel settings.
11. Use the built-in cable management system to organize and conceal the cables for a clean and professional installation.
12. Double-check the installation to ensure that all connections are secure and the TVs are stable.
Please refer to the included manual for detailed instructions and illustrations specific to the CONCEPTRONIC 650371 Ceiling Mount Triple Screen TV Bracket.
Add New Comment