User Manual Q&AAnswer
Jan 20, 2025 - 10:03 PM
To install and set up the LevelOne POR-1200 Outdoor PoE-Plus Repeater, please follow the steps below:
1. Mounting: Use the included mounting kit to securely mount the POR-1200 repeater in a suitable outdoor location. Ensure that the mounting surface is stable and can support the weight of the repeater.
2. Connections: Connect the POR-1200 repeater to your network using Ethernet cables. The repeater has three RJ-45 ports: one "IN" port and two "OUT" ports.
- Connect one end of an Ethernet cable to the "IN" port of the repeater.
- Connect the other end of the Ethernet cable to the Power Sending Equipment (PSE), such as a PoE-Plus switch, that will provide power and data to the repeater.
- Connect one end of another Ethernet cable to one of the "OUT" ports of the repeater.
- Connect the other end of the Ethernet cable to the device that you want to extend the PoE connection to (e.g., a PoE IP camera).
- If you need to extend the connection to a non-PoE device, connect an Ethernet cable from the second "OUT" port of the repeater to the non-PoE device.
3. Power: The POR-1200 repeater does not require an additional power supply. It receives power from the Power Sending Equipment (PSE) through the "IN" port.
4. Daisy Chaining: If you need to extend the range further, you can daisy chain multiple POR-1200 repeaters. Simply connect the "OUT" port of one repeater to the "IN" port of the next repeater using Ethernet cables.
5. Configuration: The POR-1200 repeater is a plug-and-play device and does not require any software installation or configuration. Once the connections are made, the repeater will automatically forward the Power over Ethernet (PoE) to the remote device.
Please refer to the Quick Installation Guide provided in the package for more detailed instructions and illustrations.
Add New Comment