User Manual Q&AAnswer
Jan 20, 2025 - 09:31 PM
To connect a probe to the Sauermann HQ 210 Thermo-Hygrometer, follow these steps:
1. Locate the mini-DIN connection on the instrument.
2. Connect the mini-DIN cable of the probe to the mini-DIN connection on the instrument.
3. Ensure that the connection is secure.
4. You will hear a beep sound, indicating that the operation has been correctly performed.
Please refer to the "Connections" section in the user manual for visual references and additional information.
Note: If you are using an air velocity probe, please remember to lower the protective tube of the sensitive element before use. Also, make sure to use the appropriate air velocity probe with the correct orientation (red point in front of the flow for standard probe, white point in front of the flow for telescopic probe).
For further assistance or troubleshooting, you can visit the Sauermann customer service portal at http://kimo-en.custhelp.com.
Add New Comment