User Manual Q&AAnswer
Jan 20, 2025 - 09:13 PM
To pair the hama EMW-700 ERGONOMIC Vertical Multi Device Mouse with your device, follow these steps:
1. Make sure the mouse is turned on by sliding the ON/OFF switch (13) to the ON position.
2. For 2.4 GHz pairing mode:
a. Plug the USB receiver (15) into an available USB port on your computer.
b. Wait for the operating system to recognize the mouse and install any necessary drivers.
c. The status LED (5) for 2.4 GHz will light up solid blue, indicating a successful connection.
3. For Bluetooth pairing mode:
a. Press and hold the Mode-Switch button (10) for about 3 seconds until the status LED (6) for Bluetooth 1 starts flashing.
b. On your device, enable Bluetooth and search for available devices.
c. Select the "hama EMW-700" from the list of available devices.
d. Follow any additional on-screen instructions to complete the pairing process.
e. Once the pairing is successful, the status LED (6) for Bluetooth 1 will light up solid blue.
4. If you want to pair the mouse with another Bluetooth device, repeat step 3 but make sure to press and hold the Mode-Switch button (10) until the status LED (7) for Bluetooth 2 starts flashing.
5. The mouse can be paired with up to three devices (2.4 GHz and two Bluetooth devices) and can be switched between them using the Mode-Switch button (10).
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment