User Manual Q&AAnswer
Jan 20, 2025 - 08:57 PM
To install the PSM-DIN2/3ZBS DIN Rail Power Meter Switch on a power distribution cabinet, please follow these steps:
1. Ensure that the power to the cabinet is turned off before installation to prevent any electrical hazards.
2. Locate a suitable position on the DIN rail inside the power distribution cabinet to mount the PSM-DIN2/3ZBS. The PSM-DIN2/3ZBS is designed to fit in standard DIN rail enclosures.
3. Align the PSM-DIN2/3ZBS with the DIN rail and slide it into place until it clicks securely.
4. Connect the input connector of the PSM-DIN2/3ZBS to the power supply source. This will be the power circuit breaker that you want to control.
5. Connect the output connector of the PSM-DIN2/3ZBS to the load that you want to control, such as a specific electrical device or circuit.
6. Once the connections are made, you can turn on the power to the cabinet.
7. The PSM-DIN2/3ZBS is now ready to measure, monitor, and control the energy consumption of the connected load.
Please refer to the user guide for more detailed instructions and illustrations on the installation process.
Add New Comment