User Manual Q&AAnswer
Jan 20, 2025 - 08:50 PM
To remove a test strip from the spill-resistant vial of the ACCU-CHEK Guide Me Blood Glucose Monitor, you can try one of the following techniques:
1. Front Slide: Place any finger on the front test strip and press in while sliding your finger up to raise, then pull it out.
2. Side Pinch: Grasp the sides of the outermost test strip with a pinching action as you pull up.
3. Pinch and Pull: Place your index finger on top of the test strips. Then, with your thumb, press in against the test strips and slide the front test strip up to pull it out in one motion.
4. Back Slide: Place your finger on the back test strip and press in against the test strips. Slide your finger up to raise, then pull it out.
Remember to follow all instructions in the package insert, including washing and drying your hands thoroughly, not bending the test strips, avoiding getting dirt on the test strip, and closing the cap tightly when finished.
If you have any further questions or concerns, please call the Accu-Chek Enquiry Line at 1800 251 816.
Note: The information provided is based on the ACCU-CHEK Guide Me Blood Glucose Monitor User Manual. Always read and follow the instructions for use and consult your healthcare professional for advice.
Add New Comment