How do I install the Lucci decor 011863 Zahra 1LT Wall Bracket? (Lucci decor 011863 Zahra 1LT Wall Bracket Instruction Manual)

Answer

manuals.plus

Jan 20, 2025 - 08:47 PM


To install the Lucci decor 011863 Zahra 1LT Wall Bracket, please follow these steps:

1. Ensure that the power to the circuit you are working on has been switched OFF before starting any electrical work.

2. Remove all packaging material from the product and make sure not to throw away any accessories that may be hidden within the packaging.

3. Place the luminaire on a smooth non-scratch surface if assembly is required.

4. Remove the mounting bracket (C) from the luminaire (F) by loosening the screws (E) on the sides.

5. Use the mounting bracket (C) as a template to mark the  xxxx  positions on the wall.

6. Install the mounting bracket (C) onto the wall using appropriately sized mounting screws (D) and anchors (A). Make sure the screws (D) and anchors (A) used are suitable for the mounting surface and the surrounding environment.

7. Connect the mains supply wire to the terminal block (B). Ensure the wires are secure, and no bare wires are exposed. The wiring should be as follows:
   - Earth: Yellow/Green wire to Yellow/Green or
   - Neutral: Blue or Black wire to Blue or N
   - Live: Brown or Red wire to Brown or L

8. Install the luminaire (F) back onto the mounting bracket (C) and secure it by tightening the screws (E) on the sides.

9. Install a gasket (H) onto the lamp holder (G), followed by the larger shade (J), another gasket (K), and secure using the lamp holder ring (L).

10. Install a suitable globe (not included) into the lamp holder (G). Make sure not to exceed the maximum wattage rating.

11. Install the glass ball shade (M) onto the lamp holder (G).

12. After the installation, switch on the luminaire to test and enjoy your new lighting product.

Please note that these instructions are a summary, and it is important to refer to the complete instruction manual for detailed guidance and safety precautions.