User Manual Q&AAnswer
Jan 20, 2025 - 06:10 AM
To connect your Vivitek D537W HDMI VGA 3D Ready DLP Projector to your computer, you can follow these steps:
1. Ensure that both your projector and computer are turned off.
2. Locate the HDMI or VGA port on your computer and the corresponding port on the projector.
3. If you are using an HDMI connection, connect one end of the HDMI cable to the HDMI port on your computer and the other end to the HDMI port on the projector. If you are using a VGA connection, connect one end of the VGA cable to the VGA port on your computer and the other end to the VGA port on the projector.
4. Once the cables are securely connected, turn on your computer and then turn on the projector.
5. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but you can usually find the display settings by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
6. In the display settings, choose the option to extend or duplicate your display onto the projector.
7. Adjust the focus and keystone correction on the projector as needed to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Vivitek D537W HDMI VGA 3D Ready DLP Projector. You can access the manual using the link provided.
Add New Comment