User Manual Q&AAnswer
Jan 20, 2025 - 06:05 AM
To connect your Casio XJ-S33 Super-Slim DLP Data Projector to a computer, follow these steps:
1. Ensure that both the projector and the computer are powered off.
2. Connect one end of the VGA cable (not included) to the VGA output port on your computer.
3. Connect the other end of the VGA cable to the VGA input port on the projector.
4. Turn on your computer and wait for it to fully boot up.
5. Press the Power button on the projector to turn it on.
6. Use the Input Select button on the projector or the remote control to select the VGA input source.
7. Adjust the focus and zoom if necessary using the focus and zoom rings on the projector lens.
8. If the projected image does not appear correctly, you may need to adjust the screen resolution on your computer. Refer to your computer's user manual for instructions on changing the screen resolution.
For more detailed information and troubleshooting tips, please refer to the Casio XJ-S33 Super-Slim DLP Data Projector User Guide provided in the link you provided.
Add New Comment