User Manual Q&AAnswer
Jan 20, 2025 - 05:59 AM
To bind the , follow these steps:
1. Fit the binding plug to socket 3 on the receiver and connect the power supply.
2. The receiver LED will begin to blink.
3. Press and hold down the binding button on the transmitter and switch the power on. This will put the transmitter into binding mode.
4. Once the binding process has finished, the LED will shine.
5. Switch off both the transmitter and receiver.
6. Remove the binding plug.
It is important to note that the system will not function while the binding button is pressed, and the system should not be left in binding mode for long periods of time.
For more detailed instructions and safety information, please refer to the complete instructions and security instructions provided with the product.
Add New Comment